Sunday, October 26, 2014

Repost - Why Detailed Embossing Powder is KING!!



This is another questions I get a lot so I figured I would repost information on why Detailed Embossing Powder is King for embossing words and fine details. I recommend Ranger fine detail embossing powders as well as Stampendous and Sparkle 'n Sprinkle.

*****************************************************************************

Today I'm sharing tips about heat embossing and choosing the right kind of embossing powder for your projects. If you haven't heard, there's several kinds of embossing powder on the market. Today I am going to explain the difference between detailed and regular embossing powder.

I'll share tips on embossing the smallest script sentiments and the most detailed stamps. I wish someone had told me about these tips when I first started heat embossing. I went out and bought a large pack of 15 colors thinking I was "doing something." Since then, I haven't used the technique much because my results would often ruin my finished projects. I loved the thought and look of heat embossing but something was just a bit off. Well, never fear!! I've got your back. This tutorial should help make your heat embossed projects come out perfectly.

1. Supplies needed to make your heat embossing work best include:



  • Darice stamp mat (mine is cut in half) - don't stamp anything without this!!

  • Embossing buddy (EK Success powder tool or a drier sheet)

  • VersaMark (or any watermark stamp pad) and VersaMarker (to correct an oops moments)

  • Get Inky! Stamps (of course) and a clear block

  • Embossing Powder

  • Heat Gun

  • Cardstock

  • NOT SHOWN - Embossing/glitter tray (shoe box top or a folded piece of copier paper to catch and return the embossing powder to its container)



  • 2.   Before doing anything, run the embossing buddy over the cardstock several times. That will coat it with powder disallowing the embossing powder to stick anywhere but where you want it to.




    3.   Ink the stamp and stamp the impression with the cardstock on top of the stamp mat. You will not be able to see the impression much since it's a watermark ink. Place the cardstock in the embossing tray and dump embossing powder on the stamped area. Some embossing powder will stick to the stamped area. Return the embossing powder that falls off back to its container and close the container.

    Here you can see an example of the Happy Kwanzaa stamp from the Get Inky! Stamps - 2013 Holiday Set (available at Etsy by clicking the link). It is a small skinny font. On the left is the detailed embossing powder. As you can see, you can barely see that it has embossing powder on it. it almost looks stamped because the grains are so fine. The normal embossing powder is a little more chunky and fuzzy. Furthermore, you can see areas where the powder has not stuck to stamped image.






    4.  Next step is to use a heat gun to heat the embossing powder until it melts. If it looks grainy then you need to heat it more. If the paper gets brown and burnt, you've heated too long. The color will change before your eyes. It will turn from a powder to a liquid and takes a matter of seconds. You may want to use tweezers to keep my cardstock from moving around on the table. But make sure your cardstock is flat on the table during the heating process.

    Here's the results! The detailed embossing powder created an even, shiny, beautifully embossed sentiment even though the font is small and skinny. The regular embossing powder created more of a spotty, messy embossing of the font. It's more shiny and more puddled.

    Detailed embossing powder is made to pick up details in the stamps without puddling. Regular embossing powder is made to puddle and melt together to fill in the spaces. That's why it doesn't stick to every part of the stamped image. While detailed embossing powder works well on BOTH detailed stamps and non-detailed stamps, regular embossing powder is ONLY for larger non-detailed stamps.






    Here's some more examples from the 2013 Holiday Set. The top impression is made with regular embossing powder. Notice the lines are thicker and more puddled. The bottom impression is done with detailed embossing powder. The lines are thinner - exactly as the stamp was created - and the embossing stays in place and does not puddle at all.






    Here's two other views that exemplify the difference between the two embossing powders. Looks like I need to heat the middle "Ho" on the bottom some more. It's not fully melted! I love the fine lines in this stamp. It will really make wonderful Christmas crafts!














    Finally, I have 2 other examples to point out using stamps from the massive Buzzing Bees set. The beautiful script comes out best with detailed embossing powder. When you compare all the loops and holes in the font they are open with the detailed embossing powder and closed with the regular. While it still can be read, it's not as neat, clean and true to form as with the detailed embossing powder.







    There are may bees in this set so I chose a very hairy one to show you the difference. This one is harder to see but the hairs are thinner and more individual with the detailed embossing powder than with the regular. The eyes look clearer with the white dot being more visible as well. On the wing of the detailed embossing powdered bee, I didn't apply enough pressure so I used the VersaMarker to go in and add more watermark ink in the spot I missed. I was then able to reapply the embossing powder and heat everything together.





    I suggest using detailed embossing powder for all your embossing needs. I use Ranger super fine detail and Stampendous detail embossing powders. Also check out Ranger Embossing Powder Sticky to adhere glitter, foil, flocking. I hope this helps skyrocket your creativity!!

    If you have any questions, please leave it in the comments and I will do my best to answer them. If you'd like a new tutorial on the Ranger Embossing Powder Sticky, leave that in the comments as well!

    Until next time... now go Get Inky!!

    La-Vie

    12 comments:

    1. Have not done that for a while so guess you inspired me to do so TFS the details! from BL group E&H

      ReplyDelete
    2. So glad your shared this information very useful and you did an awesome job explaining and showing details. Thank you. BL

      ReplyDelete
    3. another great brand for DETAIL powders is Judikins! she has some great colors in regular powder, too!

      ReplyDelete
    4. great job.. fab details and great projects.. TFS.. BL

      ReplyDelete
    5. Thanks for the explanation of the different embossing powders. I would love to see a tutorial of the Ranger Embossing Powder Sticky.

      ReplyDelete
    6. Stephanie B's Creative Designs here. Thanks for the GREAT tutorial.. BL

      ReplyDelete
    7. What a great tutorial!! I may have had more success years ago if I saw this!!! BL Hugs ~ Lori

      ReplyDelete
    8. Great instructions. I love it!! I found 8 bottles of Ranger Embossing powder at a garage sale for $5. and it hadn't been opened yet. boy that was a find!! I haven't heat embossed in years. I have bags of it in a drawer in one of my craft rooms - I used to give bits out to people as gifts when I was a Stampn' Up! demonstrator, but no more,,, I have clear, white and silver and gold. crazy... and there's your BL

      ReplyDelete
    9. Stephanie B's Creative Designs here. I never knew there was so much to embossing!! BL

      ReplyDelete
    10. Wonderful tutorial - your images really show the difference well.
      Lyne - BL
      For scrapbook inspiration follow me at Lynn’s Everyday Ideas

      ReplyDelete
    11. Great idea to re-post this. I've always wonder about the detail embossing powders.
      Happy BL An'Jenic

      ReplyDelete

    Your comments bring me SO much Joy! Thanks for taking the time to stop by and view my creations. If you love what you see, please share my posts and invite your friends to follow me as well! ~XXX La-Vie B.